Ubuntu Feisty 7.04 manual page repository
Ubuntu is a free computer operating system based on the Linux kernel. Many IT companies, like DeployIS is using it to provide an up-to-date, stable operating system.
Provided by: freebsd-manpages_6.0-5_all
aha - Adaptec SCSI host adapter driver
device aha device scbus In /boot/device.hints: hint.aha.0.at="isa"
This driver provides access to the SCSI bus connected to the Adaptec AHA-154x and AHA-1640 SCSI host adapters. x is 0 for controllers without a floppy drive and 2 for controllers that have them. For optimum perfor‐ mance, Adaptec AHA-174x controllers should be configured in enhanced mode ahb(4) driver. One device hint entry for every card to be attached by the system is required. Specific values for the port address, IRQ, and DRQ may be specified. If wildcard values are used, the driver will query the device for its current settings and use those. If the port address is a wild‐ card, the driver consults an internal table of possible port address locations and attaches to the first unattached card it finds. The possi‐ ble port addresses for this card are 0x330, 0x334, 0x230, 0x234, 0x130, and 0x134. The AHA-1640 is an MCA bus card. Since the MCA bus is a self-identifying bus, no setting of hints is required.
The aha driver supports the following SCSI host adapters: Adaptec AHA-154xB Adaptec AHA-154xC Adaptec AHA-154xCF Adaptec AHA-154xCP Adaptec AHA-1640 Adaptec AHA-174x in 154x emulation mode DTC 3290 SCSI controller in 1542 emulation mode Tekram SCSI controllers in 154x emulation mode scsi(4)
The aha driver was ported by M. Warner Losh from the bt driver written by Justin T. Gibbs.
The AHA-154xA card does not support residuals on data transfers. As a result, this card is no longer supported. There have been some reports that the AHA-154xB does not work well under heavy load. The AHA-154xCP is a plug and play controller. However, its resources are set using the on-board BIOS and cannot be moved. Failures to attached for this card are often caused when the resources set in the BIOS con‐ flict.